Thank you for your purchase of the brand-new 2025 SeekBox S3 Pro. Let's go through the setup procedure:

Basic Setup

1. Connect the S3 Pro to the power adaptor.

2. Connect the S3 Pro to your TV or monitor using the included HDMI cable, or use an AV cable if your display requires an AV port.

3. Insert two AAA batteries into the Bluetooth remote control.

Once completed, please follow the on-screen initial setup wizard to finish the configuration.

1. After the basic setup is complete, wait for the system to finish booting.

2. Pairing the Bluetooth remote control: Press and hold the voice button and the return button simultaneously for more than 3 seconds. Wait until the remote control indicator light flashes, indicating it has entered pairing mode. Wait for the device to connect. When the screen shows 'connection successful' and the indicator light turns off, the pairing is complete. The system will automatically proceed to the next setup step.

3. Select your Language, then select NEXT and press [OK] to next

4. Adjust the screen size according to your display effect until the screen edge matches the TV, then select NEXT and press [OK] to proceed to the next step

5. Select your WIFI and press [OK] to enter the password

 

6. Select your Time Zone, then select NEXT and press [OK] to next

7. No action is required while waiting for the device to initialize; the system will complete everything automatically without any intervention from you. This includes automatic configuration and application installation. Once everything is finished, you will be automatically taken to the desktop environment!!